Corner Joint
Corner Joint
Reinforced Corner Joint
Reinforced Corner Joint
Rafter Base
Ridge Support
Two Way Ridge Support
4 Way with Rafter Base
Leg Height Extender
TrimLine Riser Tee
TrimLine Foot
StaBar Ell
StaBar 3 Way
Large Diameter Ell
Large Diameter 3 Way
Large Diameter Long Ell
Large Diameter Long/Short 3 Way LD 200 LS
StaBar Tee
Large Diameter Long/Short Tee 
Large Diameter Ell
Large Diameter 3 Way
Awning Ell
Awning Tee
StaBar Ell
Sign Sleeve
Awning Ell
Awning Tee
LD Sign Sleeve
StaBar 3 Way
StaBar Ell
Door Ell
Additional Leg Joint
TrimLine Foot
Door Frame 4-Way
Door Frame 3-Way
Door 3-Way
StaBar Ell
Offset Leg Fitting
Ell Joint 1"
TrimLine Foot
StaBar Ell
StaBar 3 Way
TrimLine Foot
Indoor 3 Way
StaBar Tee
Indoor Four Way
Corner Joint
4 Way with Rafter Base
MeshPanel Ell
StaBar Ell
Long Foot Plate
20" Wheeled Foot Plate
Ell Joint 1"
StaBar 3 Way
StaBar Ell
Indoor 3 Way
StaBar Ell
Long StaBar Ell
Indoor Tee 1"
Ell Joint 1"
StaBar Tee Long/Short Replacement Parts for the Craft Hut Canopy
TrimLine Foot
Craft Hut Corner Joint
Craft Hut Rafter Base
French Wall or Indoor Ell
LD Ell - Black Arrow
LD Long Ell
LD Door Ell
Lock Pin
Upper Leg Fitting
Replacement Parts for Pop-Up Canopies
EZ Series for square legs
Upper StaBar
Ell
Upper Stabar
Upper StaBar
Long Ell
Long/Short StaBar Tee
StaBar Tee
G series for hex or oct legs
Lower StaBar
Ell
Upper Stabar
Upper StaBar
Long EllReplacement Parts for Light-Dome Canopy
9 inch Ball Bungee
6 inch Ball Bungee
Zipper Pull
S Hooks - 1"
PinHook - 1" for MP/SW
PinHook - 1 3/8" for GD
Hook Clip Due the huge number of different poles we produce, we ask that you call for a consultation in order to find the appropriate item for your requirements. Prices range from $7 to $21 per pole section.
Basic terminology:
Male pole (clicks together with female section to from longer poles)
Female pole (clicks together with male section to form longer poles)

Details of Poles
Snap Buttons (used to positively connect pole sections to each other and to Parts)
Rafter Center (PVC section with tapered ends)

Rafter Ends (PVC section with steel sleeve at one end)

Canopy Legs:
Current canopy legs are telescoping, two part legs. Upper sleeve is larger diameter pipe and has a series of holes for height adjustment. Lower section is standard diameter pipe.
*Canopies built before 2008 have three-part legs and require non-standard awning and Upper StaBar parts. Please call to confirm correct poles and parts for older canopies.